51 citations as recorded by crossref.

1. Closed-loop 4D-printed soft robots A. Zolfagharian et al. 10.1016/j.matdes.2019.108411
2. Robotic Hands with Intrinsic Tactile Sensing via 3D Printed Soft Pressure Sensors M. Ntagios et al. 10.1002/aisy.201900080
3. Sensing Systems in Construction and the Built Environment: Review, Prospective, and Challenges A. Malekmohammadi et al. 10.3390/s23249632
4. Novel Resistive Sensor Design Utilizing the Geometric Freedom of Additive Manufacturing H. Watschke et al. 10.3390/app11010113
5. Development of Soft sEMG Sensing Structures Using 3D-Printing Technologies G. Wolterink et al. 10.3390/s20154292
6. Fused filament fabrication of commercial conductive filaments: experimental study on the process parameters aimed at the minimization, repeatability and thermal characterization of electrical resistance G. Stano et al. 10.1007/s00170-020-06318-2
7. An Integrative 3D printing method for rapid additive manufacturing of a capacitive force sensor G. Liu et al. 10.1088/1361-6439/abf843
8. Bioinspired Cilia Sensors with Graphene Sensing Elements Fabricated Using 3D Printing and Casting A. Kamat et al. 10.3390/nano9070954
9. Dynamic Measurements Using FDM 3D-Printed Embedded Strain Sensors M. Maurizi et al. 10.3390/s19122661
10. 3D Printed Integrated Sensors: From Fabrication to Applications—A Review M. Hassan et al. 10.3390/nano13243148
11. New Frontiers in 3D Structural Sensing Robots M. Kaur et al. 10.1002/adma.202002534
12. Sistema resistivo impreso en 3D multi-material para comandar sistemas robóticos J. Minguella-Canela et al. 10.17979/ja-cea.2024.45.10849
13. Biomimetic Soft Polymer Microstructures and Piezoresistive Graphene MEMS Sensors Using Sacrificial Metal 3D Printing A. Kamat et al. 10.1021/acsami.0c21295
14. Recent Progress in 3D Printed Mold-Based Sensors S. He et al. 10.3390/s20030703
15. Modelling of Anisotropic Electrical Conduction in Layered Structures 3D-Printed with Fused Deposition Modelling A. Dijkshoorn et al. 10.3390/s21113710
16. Novel 3D printed capacitive shear stress sensor J. Oprel et al. 10.1016/j.addma.2023.103674
17. Creating 3D printed sensor systems with conductive composites N. Lazarus & S. Bedair 10.1088/1361-665X/abcbe2
18. Piezoresistive dynamic simulations of FDM 3D-Printed embedded strain sensors: a new modal approach M. Maurizi et al. 10.1016/j.prostr.2020.02.036
19. Processing of Self‐Healing Polymers for Soft Robotics E. Roels et al. 10.1002/adma.202104798
20. Embedded Sensors with 3D Printing Technology: Review J. Bas et al. 10.3390/s24061955
21. Additive manufacturing: state of the art and potential for insect science M. Jaffar-Bandjee et al. 10.1016/j.cois.2018.09.011
22. Towards a compact XYZ$$\varvec{\uptheta }$$ positioning system with built-in actuators using 3D printing of conductive polymer B. Calmé et al. 10.1007/s12213-023-00159-4
23. Additive manufacturing and characterization of a load cell with embedded strain gauges G. Stano et al. 10.1016/j.precisioneng.2019.11.019
24. A Review of Extrusion-Based 3D Printing for the Fabrication of Electro- and Biomechanical Sensors M. Schouten et al. 10.1109/JSEN.2020.3042436
25. Fused Filament Fabrication of Polymers and Continuous Fiber-Reinforced Polymer Composites: Advances in Structure Optimization and Health Monitoring F. Mashayekhi et al. 10.3390/polym13050789
26. Additive manufacturing of ceramic materials for energy applications: Road map and opportunities C. Cramer et al. 10.1016/j.jeurceramsoc.2022.01.058
27. Development of a Novel Spherical Light-Based Positioning Sensor in Solar Tracking O. Gora & T. Akkan 10.3390/s23083838
28. Effect of Process Parameters in Additively Manufactured Sensors prepared via Material Extrusion Processes: Correlation among Electrical, Mechanical and Microstructure Properties G. Stano et al. 10.1016/j.addlet.2024.100194
29. A 3D Printing‐Enabled Artificially Innervated Smart Soft Gripper with Variable Joint Stiffness G. Goh et al. 10.1002/admt.202301426
30. In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials R. van Dommelen et al. 10.1088/2058-8585/ac20c0
31. Layer inspection via digital imaging and machine learning for in-process monitoring of fused filament fabrication A. Rossi et al. 10.1016/j.jmapro.2021.08.057
32. Towards the development of a smart fused filament fabrication system using multi-sensor data fusion for in-process monitoring M. Moretti et al. 10.1108/RPJ-06-2019-0167
33. Development of a 3D Printed Structural Electronics Force Sensor J. Xu et al. 10.1109/ACCESS.2024.3390932
34. Additive Manufacturing for Sensor Integrated Components I. Jung et al. 10.4150/KPMI.2020.27.2.111
35. Decoding and realising flapping flight with port-Hamiltonian system theory F. Califano et al. 10.1016/j.arcontrol.2021.03.009
36. Three-Dimensional Printing in Stimuli-Responsive Yield-Stress Fluid with an Interactive Dual Microstructure W. Hua et al. 10.1021/acsami.2c12465
37. Integration of 3D Printed Flexible Pressure Sensors into Physical Interfaces for Wearable Robots K. Langlois et al. 10.3390/s21062157
38. Process Parameters and Geometry Effects on Piezoresistivity in Additively Manufactured Polymer Sensors M. Goutier et al. 10.3390/polym15092159
39. Enhancing the sensitivity of 3D printed sensors via ironing and void reduction G. Stano et al. 10.1080/17452759.2024.2331153
40. I-support soft arm for assistance tasks: a new manufacturing approach based on 3D printing and characterization L. Arleo et al. 10.1007/s40964-020-00158-y
41. DC Electric Metamaterial Behavior in Fused Filament Fabrication Prints With Tuned Interfaces A. Dijkshoorn et al. 10.1109/JFLEX.2023.3331563
42. 3D Printing Technology and Materials for Automotive Application: A Mini-Review B. Tuazon et al. 10.4028/p-26o076
43. From 3D to 4D printing: A review B. Mena Barreto dos Santos et al. 10.1016/j.matpr.2023.05.707
44. Parameter effects and process modeling of FFF-TPU mechanical response J. Kechagias et al. 10.1080/10426914.2021.2001523
45. Electrically Conductive Fused Deposition Modeling Filaments: Current Status and Medical Applications Z. Aloqalaa 10.3390/cryst12081055
46. Characterizing the Electrical Properties of Anisotropic, 3D-Printed Conductive Sheets for Sensor Applications A. Dijkshoorn et al. 10.1109/JSEN.2020.3007249
47. In-process monitoring of part geometry in fused filament fabrication using computer vision and digital twins M. Moretti et al. 10.1016/j.addma.2020.101609
48. Fabrication and challenges of 3D printed sensors for biomedical applications-Comprehensive review J. Hussan K S et al. 10.1016/j.rineng.2024.101867
49. A review on the use of additive manufacturing to produce lower limb orthoses M. Alqahtani et al. 10.1007/s40964-019-00104-7
50. In-process monitoring of part warpage in fused filament fabrication through the analysis of the repulsive force acting on the extruder M. Moretti & N. Senin 10.1016/j.addma.2021.102505
51. Energy-Aware Control of Euler–Bernoulli Beams by Means of an Axial Load F. Califano et al. 10.1109/TMECH.2022.3192324