23 citations as recorded by crossref.

1. Room temperature manufacture of dense NaSICON solid electrolyte films for all-solid-state-sodium batteries M. Sozak et al. 10.1007/s10853-023-08642-w
2. Pulsed Polarization-Based NOx Sensors of YSZ Films Produced by the Aerosol Deposition Method and by Screen-Printing J. Exner et al. 10.3390/s17081715
3. Multi-gas sensor to detect simultaneously nitrogen oxides and oxygen J. Herrmann et al. 10.5194/jsss-9-327-2020
4. Unravelling the sintering temperature-induced phase transformations in Ba(Fe0.7Ta0.3)O3-δ ceramics B. Mallesham et al. 10.1016/j.ceramint.2020.04.124
5. How to treat powders for the room temperature aerosol deposition method to avoid porous, low strength ceramic films J. Exner et al. 10.1016/j.jeurceramsoc.2018.08.008
6. Thick-films of garnet-type lithium ion conductor prepared by the Aerosol Deposition Method: The role of morphology and annealing treatment on the ionic conductivity D. Hanft et al. 10.1016/j.jpowsour.2017.06.061
7. On the defect chemistry of BaFe0.89Al0.01Ta0.1O3‐, a material for temperature independent resistive and thermoelectric oxygen sensors M. Bektas et al. 10.1016/j.ssi.2017.12.017
8. High-Temperature Electrical Insulation Behavior of Alumina Films Prepared at Room Temperature by Aerosol Deposition and Influence of Annealing Process and Powder Impurities M. Schubert et al. 10.1007/s11666-018-0719-x
9. Sintering temperature induced structural phase transitions in Ba(Fe0.7Ta0.3)O3-δ ceramic: A detailed rietveld study B. Mallesham & C. Ramana 10.1016/j.physb.2023.414992
10. Tuning of the electrical conductivity of Sr(Ti,Fe)O3 oxygen sensing films by aerosol co-deposition with Al2O3 J. Exner et al. 10.1016/j.snb.2016.02.033
11. What Happens during Thermal Post‐Treatment of Powder Aerosol Deposited Functional Ceramic Films? Explanations Based on an Experiment‐Enhanced Literature Survey J. Exner et al. 10.1002/adma.201908104
12. Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell Particles M. Linz et al. 10.1002/adma.202308294
13. Combined resistive and thermoelectric oxygen sensor with almost temperature-independent characteristics M. Bektas et al. 10.5194/jsss-7-289-2018
14. Oxygen sensors based on SrTi0.65Fe0.35O3−δ thick film with MgO diffusion barrier for automotive emission control H. Li et al. 10.1016/j.snb.2015.02.079
15. Powder Pre-Treatment for Aerosol Deposition of Tin Dioxide Coatings for Gas Sensors D. Hanft et al. 10.3390/ma11081342
16. Powder requirements for aerosol deposition of alumina films J. Exner et al. 10.1016/j.apt.2015.05.016
17. Strategies for improving oxygen ionic conducting in perovskite oxides and their practical applications W. Li et al. 10.1016/j.enrev.2024.100085
18. SnO2 doped MoO3 nanofibers and their carbon monoxide gas sensing performances R. Nadimicherla et al. 10.1016/j.ssi.2016.12.022
19. Resistive Multi-Gas Sensor for Simultaneously Measuring the Oxygen Stoichiometry (λ) and the NOx Concentration in Exhausts: Engine Tests under Dynamic Conditions C. Steiner et al. 10.3390/s23125612
20. Powder aerosol deposition method — novel applications in the field of sensing and energy technology M. Schubert et al. 10.1142/S1793604719300056
21. In- and through-plane conductivity of 8YSZ films produced at room temperature by aerosol deposition J. Exner et al. 10.1007/s10853-019-03844-7
22. LaCrO 3 nano photocatalyst: the effect of calcination temperature on its cellulose conversion activity under UV-ray irradiation R. Situmeang et al. 10.1088/2043-6254/ab0280
23. Resistive, Temperature-Independent Metal Oxide Gas Sensor for Detecting the Oxygen Stoichiometry (Air-Fuel Ratio) of Lean Engine Exhaust Gases C. Steiner et al. 10.3390/s23083914